GLC-EX-SMD: 1000BASE-EX SFP Transceiver Module for 40km Links
Model: GLC-EX-SMD Cisco SFP
Detail: Cisco GLC-EX-SMD GE SFP, LC Connector, EX transceiver
Description Transceiver GLC-EX-SMD 1000BASE
The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis. GLC-EX-SMD is 1000BASE-EX long-wavelength; with DOM. Find more details from the official site by clicking here
GLC-FE-100LX-RGD Transceiver: 100BASE-LX SFP Module for Fast Ethernet Networks
Model: GLC-FE-100LX-RGD Cisco SFP
Detail: Cisco GLC-FE-100LX-RGD 100Mbps Single Mode Rugged SFP
GLC-FE-100LX-RGD Transceiver Description
The GLC-FE-100LX-RGD is a third-party compatible SFP for Cisco. This 100BASE module will reach 10km and uses a wavelength of 1310nm. All GLC-FE-100LX-RGD are in-system tested in real Cisco routers and switches. Find more details from the official site by clicking here
GLC-LH-SMD: Cisco 1000BASE-LX/LH SFP Transceiver Module for Single-Mode Fiber
Model: GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF
Detail: Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP is made for Both Multimode and Single-Mode Fibers.
Transceiver GLC-LH-SMD Cisco Features
- Supports 1000BASE-LX/LH standards
- Link distances up to 10 kilometers
- Duplex LC connector
- Hot-swappable
- Compatible with Cisco switches and routers
GLC-LX-SM-RGD 1000BASE-LX/LH SFP Transceiver Module for Single-Mode Fiber
Model: GLC-LX-SM-RGD Cisco SFP
Detail: Cisco GLC-LX-SM-RGD 1000Mbps Single Mode Rugged SFP
GLC-LX-SM-RGD is the Cisco SFP - GLC-LX-SM-RGD, 1000Mbps Single Mode Rugged SFP.
Transceiver GLC-LX-SM-RGD 1000 Description
The GLC-LX-SM-RGD is a 1000BASE-LX/LH SFP transceiver module that is designed for use with single-mode fiber optic cable. It supports transmission distances up to 10 kilometers and has a wavelength of 1310 nanometers. Find more details from the official site by clicking here
GLC-SX-MMD 1000BASE-SX SFP Transceiver Module for Multimode Fiber
Model: GLC-SX-MMD 1000BASE-SX short wavelength with DOM
Detail: Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
The GLC-SX-MMD 1000BASE-SX SFP is made for Multimode Fiber only.
Transceiver GLC-SX-MMD 1000BASE Features
- 1000BASE-SX SFP transceiver module
- Supports data rates up to 1 Gbps
- Supports distances up to 550 meters
- Compatible with a wide range of networking equipment
GLC-T: 1000BASE-T SFP Transceiver Module for Copper Networks
Model: GLC-T 1000BASE-T SFP
Detail: 1000BASE-T SFP
Cisco GLC-T is a 1000BASE-T SFP for Copper Networks. The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m (328 ft) link length. Cisco 1000BASE-T SFP modules support 10/100/1000 autonegotiation and Auto MDI/MDIX. This SFP needs RJ-45 connector (1000BASE-T).
GLC-ZX-SM-RGD: 1000BASE-ZX SFP Transceiver for Rugged Environments
Model: GLC-ZX-SM-RGD Cisco SFP
Detail: Cisco GLC-ZX-SM-RGD 1000BASE-ZX Single Mode RuggedSFP
Transceiver GLC-ZX-SM-RGD 1000 BASE Description
The GLC-ZX-SM-RGD is a third-party compatible SFP for Cisco. This 1000BASE module will reach 550m / 1km and uses a wavelength of 850nm. All GLC-ZX-SM-RGD are in-system tested in real Cisco routers and switches. Find more details from the official site by clicking here
GLC-ZX-SMD 1000BASE-ZX SFP Transceiver 70km Single Mode Fiber
Model: GLC-ZX-SMD Cisco SFP
Detail: Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM
Transceiver GLC-ZX-SMD 1000BASE Description
Transceiver GLC-ZX-SMD 1000BASE is a 1000BASE-ZX SFP for Long-Reach Single-Mode Fiber. The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors. Find more details from the official site by clicking here When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.
High Density 48-Port Rear Load Angled Jack Panel Kit for Clarity 6A, 6, or 5E
Description Of Jack Panel Kit for Clarity 6A 6
Rear load angled high density jack panel kit for 48 Clarity 6 or 5E panel jacks. It occupies 2 rack units and measures 19'' x 3.5''. your network infrastructure with our High Density 48-Port Rear Load Angled Jack Panel Kit designed for Clarity 6A, 6, or 5E panel jacks. This kit offers superior cable management and optimized connectivity, ensuring efficient data transmission. The rear load design and angled configuration enhance accessibility, making it an ideal solution for organized and high-performance networking setups.
