QSFP-100G-SM-SR= 100G QSFP Transceiver for Single-Mode and Short-Reach Multimode Fiber

Model: QSFP-100G-SM-SR= – Cisco 100 Gigabit Optical Modules
Detail: 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C

Transceiver QSFP-100G-SM-SR Description

The Cisco® 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on a QSFP form factor.

Find more details from the official site by clicking here

Category:

Fast Shipping

Carrier information

20k products

Payment methods

24/7 Support

Unlimited help desk

Quick Specs Of Transceiver QSFP-100G-SM-SR

Table 1 shows the Quick Specs.

Product Code QSFP-100G-SM-SR=
Description Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C
Dimensions 13.5 x 18.4 x 72.4 mm
Nominal Wavelength (nm) 1271, 1291, 1311, 1331
Cable Type SMF
Core Size (Microns) G.652
Modal Bandwidth (MHz*km) \
Cable Distance 2km
Power Consumption (W) 3.5
Pull Tab Color Green

Product Details

QSFP-100G Optical modules provide these highlights:

•Hot-swappable input/output device that plugs into a 100G Gigabit Ethernet Cisco QSFP port

•Interoperable with other IEEE-compliant 100GBASE interfaces where applicable

•Certified and tested on Cisco QSFP-100G ports for superior performance, quality, and reliability

•High-speed electrical interface compliant to IEEE 802.3bm

QSFP-100G-SM-SR= Specification

Description Cisco 100GBASE CWDM4 Lite QSFP Transceiver, 2km over SMF, 10-60C
Dimensions 13.5 x 18.4 x 72.4 mm

 QSFP Port cabling specifications

Nominal Wavelength (nm) 1271, 1291, 1311, 1331
Cable Type SMF
Core Size (Microns) G.652
Modal Bandwidth (MHz*km)*1 \
Cable Distance 2km
Power Consumption (W) 3.5
Pull Tab Color Green
*1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm

Optical characteristics

Transmit Power (dBm) per lane*2 Max:+2.5

Min:-6.9

Receive Power (dBm) per lane*2*3 Max:+2.5

Min: -11.1

Receive Power (dBm) per lane Four lanes: 1271, 1291, 1311, 1331
*2 Transmitter and receiver power is average optical power, unless specified

*3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation

Environmental Conditions and Power Requirements

Commercial temperature +10 to 60°C (50 to 140°F)
Storage temperature -40 to 85°C (-40 to 185°F)

Regulatory and Standards compliance

Standards •SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) – Rev 1.8 May 10, 2013

•SFF-8636: Common Management Interface – DRAFT Rev 1.9 May 12, 2014

•802.3™-2012 IEEE Standard for Ethernet

•IEEE 802.3ba Amendment of IEEE Std 802.3-2012

•IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014)

•GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable

•GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies

•GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment

•GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors

•RoHS 6

Safety •Cable jacket of QSFP copper modules is UL E116441 Compliant

•QSFP copper cables are ELV compliant

RELATED PRODUCTS