Cisco C1000-16P-2G-L Switch

Model: C1000-16P-2G-L – Cisco Catalyst 1000 Series Switches
Detail: 16x 10/100/1000 Ethernet PoE+ ports and 120W PoE budget, 2x 1G SFP uplinks

Description of Cisco C1000-16P-2G-L

Cisco® Catalyst® 1000 Series Switches are fixed managed Gigabit Ethernet enterprise-class Layer 2 switches designed for small businesses and branch offices. These are simple, flexible and secure switches ideal for out-of-the-wiring-closet and critical Internet of Things (IoT) deployments. Cisco® Catalyst® 1000 operate on Cisco IOS® Software and support simple device management and network management via a Command-Line Interface (CLI) as well as an on-box web UI. These switches deliver enhanced network security, network reliability, and operational efficiency for small organizations.

Categories: ,

Fast Shipping

Carrier information

20k products

Payment methods

24/7 Support

Unlimited help desk

Quick Specs of Cisco C1000-16P-2G-L

Table 1 shows the Quick Specs Cisco C1000-16P-2G-L.

Product Code

C1000-16P-2G-L

Description 16x 10/100/1000 Ethernet PoE+ ports and 120W PoE budget, 2x 1G SFP uplinks
Gigabit Ethernet ports 16
Uplink interfaces 2 SFP
PoE+power budget 120W
Fanless Y
Dimensions (WxDxH in inches) 10.56 x 11.69 x 1.73
CPU ARM v7 800 MHz
DRAM 512 MB
Flash memory 256 MB
Forwarding bandwidth 18 Gbps
Switching bandwidth 36 Gbps
Forwarding rate(64—byte L3 packets) 26.78 Mpps

Product Details  of Cisco C1000-16P-2G-L

The Cisco Catalyst 1000 Series Switches provides these features:

* 8, 16, 24, or 48 Gigabit Ethernet data or PoE+ ports with line-rate forwarding

* 2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks or 4 fixed 0 Gigabit Ethernet Enhanced SFP (SFP+) uplinks

* Perpetual PoE+ support with a power budget of up to 740W

* CLI and/or intuitive web UI manageability options

* Network monitoring through sampled flow (sFlow)

* Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard

* Compact fanless models available with a depth of less than 13 inches (33 cm)

*Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console access

* Reliability with a higher Mean Time Between Failures (MTBF) and an enhanced limited lifetime warranty support(E-LLW)

C1000-16P-2G-L Specification

Description 16x 10/100/1000 Ethernet PoE+ ports and 120W PoE budget, 2x 1G SFP uplinks
Gigabit Ethernet ports 16
Uplink interfaces 2 SFP
PoE+power budget 120W
Fanless Y
Dimensions (WxDxH in inches) 10.56 x 11.69 x 1.73

Console ports

RJ-45 Ethernet 1
USB mini-B 1
USB-A port for storage and Bluetooth console 1

Memory and processor

CPU ARM v7 800 MHz
DRAM 512 MB
Flash memory 256 MB

Performance

Forwarding bandwidth 18 Gbps
Switching bandwidth 36 Gbps
Forwarding rate(64—byte L3 packets) 26.78 Mpps
Unicast MAC addresses 16000
IPv4 unicast direct routes 542
IPv4 unicast indirect routes 256
IPv6 unicast direct routes 414
IPv6 unicast indirect routes 128
IPv4 static routes 16
IPv6 static routes 16
IPv4 multicast routes and IGMP groups 1024
IPv6 multicast groups 1024
IPv4/MAC security ACEs 600
IPv6 security ACEs 600
Maximum active VLANs 256
VLAN IDs available 4094
Maximum STP instances 64
Maximum SPAN sessions 4
MTU-L3 packet 9198 bytes
Jumbo Ethernet frame 10,240 bytes
Dying Gasp Yes
MTBF in hours (data) 2,165,105
MTBF in hours (PoE) 706,983
MTBF in hours (Full PoE) \

Environmental

Operating temperature Seal level -5 to 50 deg C*
Up to 5,000ft (1500 m) -5 to 45 deg C
Upto 10,000 (3000 m) -5 to 40 deg C
Operating altitude 10,000 ft (3,000m)
Operating relative humidity 5% to 90% at 40C
Storage temperature -13 to 158F (-25 to 70C)
Storage altitude 15,000 ft (4500m)
Storage relative humidit 5% to 95% at 65C
*Note:

50C operation is supported for short term operation only; GLC-BX-D/U and CWDM optics cannot support 50C operation; Minimum ambient temperature for cold start is at 0C (32F)

Safety and compliance

Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1

GB 4943.1-2011

EMC: Emissions

 

47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A
EMC: Immunity EN55024 (including EN 61000-4-5), EN300386, KN35
Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
Telco Common Language Equipment Identifier (CLEI) code
U.S. government certifications TBD

Connectors and interfaces

Ethernet interfaces

 

 

* 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted Pair (UTP) cabling

* 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

* 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

* 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

Indicator LEDs

 

* Per-port status: link integrity, disabled, activity

* System status: system

Console cables

 

* CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45

* CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors

Power

 

* Use the supplied AC power cord to connect the AC power connector to an AC power outlet

* Models have external power supply

RELATED PRODUCTS