ISR4461-V/K9 Specification
|
Bundle |
Voice Bundle |
Aggregate Throughput |
1.5Gbps |
Total onboard WAN or LAN 10/100/1000 ports |
4 |
RJ-45-based ports |
4 |
SFP-based ports |
4 |
Enhanced service-module slots |
3 |
Doublewide service-module slots |
2 |
NIM slots |
3 |
OIR (all I/O modules) |
Yes |
Onboard ISC slot |
1 |
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) |
NA |
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) |
NA |
Default memory DDR3 ECC DRAM (data plane) |
4 GB |
Maximum memory DDR3 ECC DRAM (data plane) |
4 GB |
Default memory DDR3 ECC DRAM (control/services plane) |
8 GB |
Maximum memory DDR3 ECC DRAM (control/services plane) |
32 GB |
Default flash memory |
8 GB |
Maximum flash memory |
32 GB |
External USB 2.0 slots (type A) |
2 |
USB console port -type B mini (up to 115.2 kbps) |
1 |
Serial console port – RJ45 (up to 115.2 kbps) |
1 |
Serial auxiliary port – RJ45 (up to 115.2 kbps) |
1 |
Power-supply options |
Internal: AC, DC and PoE |
Redundant power supply |
Internal: AC, DC and PoE |
Power Specifications
|
AC input voltage |
100 to 240 VAC auto ranging |
AC input frequency |
47 to 63 Hz |
AC input current range, AC power supply (maximum) |
7.1 to 3.0A |
AC input surge current |
60 A peak and less than 5 Arms per half cycle |
Typical power (no modules) (watts) |
– |
Maximum power with AC power supply (watts) |
1000W (no PoE) |
Maximum power with PoE power supply (platform only) (watts) |
1000 with PoE redundant
1450 with PoE boost no redundancy |
Maximum endpoint PoE power available from PoE power supply (watts) |
500 W with optional redundancy |
Maximum endpoint PoE power capacity with PoE boost (watts) |
950 W no redundancy |
Sizes and Weights
|
Dimensions
(H x W x D) |
3.5 x 17.25 x 18.5 in
88.9 x 438.15 x 469.9 mm) |
External Power Supply Dimensions (H x W x D) |
N/A |
Rack height |
2 Rack Units (2RU) |
Rack-mount 19in. (48.3 cm) EIA |
Included |
Rack-mount 23in. (58.4 cm) EIA |
Optional |
Wall-mount |
No |
Weight with 1, 450-WAC power supply (no modules) |
– |
Weight with 1 1,000-WAC power supply+ 1 PoE power module (no other modules) |
– |
Weight with AC PS (no modules) |
– |
Weight with AC PS with POE (no modules) |
– |
Typical weight (fully loaded with modules) |
– |
Airflow |
I/O side to bezel side |
MTBF (Hours) |
480770 |
Environmental Specifications
|
Operating Conditions
|
Temperature |
32 to 104ºF
(0 to 40ºC) |
Altitude
(China) |
0 – 6,560 ft.
(0 – 2,000 m) |
Altitude
(Rest of the world) |
0 – 10,000 ft.
(0 – 3,050 m) |
Relative humidity |
5% to 85% |
Short-term humidity |
5% to 90%, not to exceed 0.024 kg water/kg of dry air |
Acoustics: Sound pressure (Typical/maximum) |
50.6/73.1 dBA |
Acoustics: Sound power (Typical/maximum) |
58.2/78.8 dBA |
Nonoperating Conditions
|
Temperature |
-40 to 158ºF
(-40 to 70ºC) |
Relative humidity |
5% to 95% |
Altitude |
15,584 ft (4750m) |
Regulatory and Compliance
|
Safety |
UL 60950-1
CAN/CSA C22.2 No. 60950-1
EN 60950-1
AS/NZS 60950-1
IEC 60950-1 |
EMC |
47 CFR, Part 15
ICES-003 Class A
EN55032 Class A
CISPR32 Class A
AS/NZS CISPR 32 Class A
VCCI V-3
CNS 13438
EN 300-386
EN 61000 (Immunity)
EN 55024, CISPR 24
KN22, KN24 |
Telecom |
T1
IC CS-03:2004
TIA-968-B:2009
HKTA 2028:2010
HKTA 2017:2010
HKTA 2015: 2006
G.703:2001
ID0002:2007
IS6100:2004
DSPR Gray Book:2000
DSPR Technical Condition: 2004
E1
AS/ACIF S016: 2001
AS/ACIF S038: 2001
G.703:2001
TBR 4:1995
TBR 12:1993
TBR 13:1996
RRA 2009-38
(RRL 2005-96)
IDA TS DLCN:2011
IDA TS ISDN PRA:2005
IS6100: 2004
PTC 220:2008
Ethernet
IEEE 802.3
ANSA X3.263 |
Cisco IOS XE Software
|
Protocols |
IPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Border Gateway Protocol (BGP), BGP Router Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast sparse mode (PIM SM), PIM Source-Specific Multicast (SSM), Resource Reservation Protocol (RSVP), Cisco Discovery Protocol, Encapsulated Remote Switched Port Analyzer (ERSPAN), Cisco IOS IP Service-Level Agreements (IPSLA), Call Home, Cisco IOS Embedded Event Manager (EEM), Internet Key Exchange (IKE), access control lists (ACL), Ethernet Virtual Connections (EVC), Dynamic Host Configuration Protocol (DHCP), Frame Relay (FR), DNS, Locator ID Separation Protocol (LISP), Overlay Transport Virtualization (OTV), Hot Standby Router Protocol (HSRP), RADIUS, authentication, authorization, and accounting (AAA), Application Visibility and Control (AVC), Distance Vector Multicast Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, MPLS, Layer 2 and Layer 3 VPN, IPsec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE 802.1ag, and IEEE 802.3ah |
Encapsulations |
Generic routing encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), Frame Relay, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), Serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE) |
Traffic management |
QoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing (PfR), and Network-Based Application Recognition (NBAR) |
Cryptographic algorithms |
Encryption: DES, 3DES, AES-128 or AES-256 (in CBC and GCM modes); Authentication: RSA (748/1024/2048 bit), ECDSA (256/384 bit); Integrity: MD5, SHA, SHA-256, SHA-384, SHA-512 |