Cisco Catalyst 9130AXE-E Wireless Access Point

Model: C9130AXE-E – Cisco Catalyst 9130 WIFI 6 Access Point
Detail: Cisco Catalyst 9130AX Series

Description of Cisco Catalyst 9130AXE-E

The Cisco® Catalyst® 9130AX Series Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9130AXE-E is the Cisco Catalyst 9130AX Series Access Point, external antennas; Wi-Fi 6; 4×4:4 MIMO, E Domain.

Fast Shipping

Carrier information

20k products

Payment methods

24/7 Support

Unlimited help desk

Product Details of Cisco Catalyst 9130AXE-E

Cisco AP C9130AX Series provides these features:

• Wi-Fi 6 certified, supporting 802.11ax on both 2.4-GHz and 5-GHz bands

• Up to four Wi-Fi radios: 5GHz flexible radio (single 8×8 or dual 4×4), 2.4GHz (4×4) and Cisco RF ASIC

• OFDMA and MU-MIMO

• Multigigabit support

• Internal and external antenna

Future feature support:

• IoT ready (BLE, other 802.15.4 protocols** like Zigbee)

** – Supported in future software releases

C9130AXE-E Specification

Software

 

Catalyst 9130AXE

• Cisco Unified Wireless Network Software Release 8.10MR1 or later

• Cisco IOS ® XE Software Release 17.1.1 s or later

Supported wireless LAN controllers

 

• Cisco Catalyst 9800 Series Wireless Controllers

• Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

 

• 4×4 MIMO with four spatial streams

• Maximal Ratio Combining (MRC)

• 802.11n and 802.11a/g

• 20- and 40-MHz channels

• PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

• Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)

• 802.11 Dynamic Frequency Selection (DFS)

• Cyclic Shift Diversity (CSD) support

802.11ac

 

• 8×8 downlink MU-MIMO with eight spatial streams

• MRC

• 802.11ac beamforming

• 20-, 40-, 80-, and 160-MHz channels

• PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz)

• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

• 802.11 DFS

• CSD support

• WPA3 support

802.11ax

 

• 8×8 uplink/downlink MU-MIMO with eight spatial streams

• Uplink/downlink OFDMA

• TWT

• BSS coloring

• MRC

• 802.11ax beamforming

• 20-, 40-, 80-, and 160-MHz channels

• PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

• 802.11 DFS

• CSD support

• WPA3 support

Integrated antenna

 

• 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth

• 5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth

External antenna with Smart antenna connector

 

• The Cisco Catalyst 9130AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz)

• Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

• Supports Self-Identifiable Antennas (SIA) on the Smart antenna connector

• Smart antenna connector is a compact multi-RF connector with 8-DART interface

• Requires the AIR-CAB002-D8-R= 2-fppt smart antenna connector when used with antennas with a RP-TNC connector

• Requires the AIR-CAB003-D8-N= 3 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna

Interfaces

 

 

• 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

• Management console port (RJ-45)

• USB 2.0 at 4.5W (enabled via future software)

Indicators

 

• Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)

 

• Access point (without mounting brackets):

– C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)

Environmental

 

Cisco Catalyst 9130AXE

• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

• Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)

• Operating temperature: -4° to 122°F (-20° to 50°C)

• Operating humidity: 10% to 90% (noncondensing)

• Operating altitude test: 40˚C, 9843 ft.(3000 m)

System memory

 

• 2048 MB DRAM

• 1024 MB flash

Warranty Limited lifetime hardware warranty
Available transmit power settings

 

2.4 GHz

• 23 dBm (200 mW)

• 20 dBm (100 mW)

• 17 dBm (50 mW)

• 14 dBm (25 mW)

• 11 dBm (12.5 mW)

• 8 dBm (6.25 mW)

• 5 dBm (3.13 mW)

• 2 dBm (1.56 mW)

• -1 dBm (0.79 mW)

• -4 dBm(0.39 mW)

5 GHz

• 26 dBm (400 mW)

• 23 dBm (200 mW)

• 20 dBm (100 mW)

• 17 dBm (50 mW)

• 14 dBm (25 mW)

• 11 dBm (12.5 mW)

• 8 dBm (6.25 mW)

• 5 dBm (3.13 mW)

• 2 dBm (1.56 mW)

• -1 dBm (0.79 mW)

Maximum number of nonoverlapping channels

 

2.4 GHz

• 802.11b/g:

– 20 MHz: 3

• 802.11n:

– 20 MHz: 3

• 802.11ax:

– 20 MHz: 3

5 GHz

• 802.11a:

– 20 MHz: 26 FCC, 16 EU

• 802.11n:

– 20 MHz: 26 FCC, 16 EU

– 40 MHz: 12 FCC, 7 EU

• 802.11ac/ax:

– 20 MHz: 26 FCC, 16 EU

– 40 MHz: 12 FCC, 7 EU

– 80 MHz: 5 FCC, 3 EU

– 160 MHz 2 FCC, 1 EU

Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

Compliance standards  Safety:

– IEC 60950-1

– EN 60950-1

– UL 60950-1

– CAN/CSA-C22.2 No. 60950-1

– AS/NZS60950.1

– UL 2043

– Class III equipment

 Emissions:

– CISPR 32 (rev. 2015)

– EN 55032 (rev. 2012/AC:2013)

– EN 55032 (rev. 2015)

– EN61000-3-2 (rev. 2014)

– EN61000-3-3 (rev. 2013)

– KN61000-3-2

– KN61000-3-3

– AS/NZS CISPR 32 Class B (rev. 2015)

– 47 CFR FCC Part 15B

– ICES-003 (rev. 2016 Issue 6, Class B)

– VCCI-CISPR 32

– CNS (rev. 13438)

– KN-32

– QCVN 118:2018/BTTTT

 Immunity:

– CISPR 24 (rev. 2010)

– EN 55024 + AMD 1(rev. 2010)

– EN 55035: 2017

– KN35

 Emissions and immunity:

– EN 301 489-1 (v2.1.1 2017-02)

– EN 301 489-17 (v3.1.1 2017-02)

– QCVN (18:2014)

– QCVN 112:2017/BTTTT

– KN 489-1

– KN 489-17

– EN 60601-1-2:2015

– EN 61000-6-1: 2007

 Radio:

– EN 300 328 (v2.1.1)

– EN 301 893 (v2.1.1)

– AS/NZS 4268 (rev. 2017)

– 47 CFR FCC Part 15C, 15.247, 15.407

– RSP-100

– RSS-GEN

– RSS-247

– China regulations SRRC

– LP0002 (rev 2018.1.10)

– Japan Std. 33a, Std. 66, and Std. 71

 RF safety:

– EN 50385 (rev. Aug 2002)

– ARPANSA

– AS/NZS 2772 (rev. 2016)

– EN 62209-1 (rev. 2016)

– EN 62209-2 (rev. 2010)

– 47 CFR Part 1.1310 and 2.1091

– RSS-102

 IEEE standards:

– IEEE 802.3

– IEEE 802.3ab

– IEEE 802.3af/at

– IEEE 802.11a/b/g/n/ac/ax

– IEEE 802.11h, 802.11d

 Security:

– 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA3

– 802.1X

– Advanced Encryption Standard (AES)

 Extensible Authentication Protocol (EAP) types:

– EAP-Transport Layer Security (TLS)

– EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

– Protected EAP (PEAP) v0 or EAP-MSCHAP v2

– EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

– PEAP v1 or EAP-Generic Token Card (GTC)

– EAP-Subscriber Identity Module (SIM)

RELATED PRODUCTS