Transform Connectivity with Cisco AIR-AP3802I-E-K9 Wireless Access Point

Model: AIR-AP3802I-E-K9 – Cisco Aironet 3802i Access Point

Detail: 802.11ac Wave 2 AP w/CleanAir, 4×43, Mod, Internal Antenna, mGig, E Regulatory Domain

Description of Cisco AIR-AP3802I-E-K9

Cisco AIR-AP3802I-E-K9 is one of the Cisco 3800 Series Access Points. The Cisco Aironet 3800 Wi-Fi access points are designed for large enterprise organizations that rely on Wi-Fi to engage with customers. The 3800 series provides multiple gigabit uplink speeds of 2.5 Gbps and 5 Gbps in addition to 100-Mbps and 1-Gbps speeds. It also delivers new 802.11ac Wave 2 standard. Cisco Aironet 3800 Series Wi-Fi access points are highly versatile and deliver the most functionality of any access points in the industry.

                      Cisco AIR-AP3802I-E-K9 is designed for Indoor, challenging environments, with internal antennas. Besides, it provides A regulatory domain.

Fast Shipping

Carrier information

20k products

Payment methods

24/7 Support

Unlimited help desk

Quick Specs of Cisco AIR-AP3802I-E-K9

Table 1 shows the quick specs of AIR-AP3802I-E-K9.

Product Code AIR-AP3802I-E-K9
Antennas Internal Antennas
Interfaces – 2 Ethernet ports

– 100/1000/2500/5000 Multigigabit Ethernet (RJ-45)

– CAT 5e cabling

– Higher-quality 10GBASE-T (CAT 6/6a) cabling

– 100/1000BASE-T autosensing (RJ-45 – AUX port)

– Management console port (RJ-45)

Features – 4×4 MU-MIMO with three spatial streams

– MRC

– 802.11ac beamforming

– 20-, 40-, 80, 160-MHz channels

– PHY data rates up to 5.2 Gbps

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 DFS

– CSD support

Regulatory Domain E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

System – 1024 MB DRAM

– 256 MB flash

Dimensions (W x L x H) 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm)
Net Weight 4.6 lb (2.09 kg)

Product Details of Cisco AIR-AP3802I-E-K9

Figure 1 shows the face of the AIR-AP3802I.

Note:

Status LED
Location of the ports and connectors on the head of the AP
Location of the module connector port on the base of the AP

Module Connector Port: The AP 3800 has modularity support. This module design allows for installation onto the side of the access point. This allows for larger antenna arrays and does not constrict the development of Cisco and potentially third party modules as they are no longer limited by the physical size of the access point. Additionally, filtering is installed on the AP 3800 for cellular and other radio coexistence.

Figure 2 shows ports and connections on the head of the AP.

Note:

Kensington lock slot AUX / Gigabit Ethernet port
Mode button PoE / mGig port
Console port 48 VDC power port
USB port

AIR-AP3802I-E-K9 Specification

Detail 802.11ac Wave 2 AP w/CleanAir, 4×4:3, Mod, Internal Antenna, mGig, E Regulatory Domain
Regulatory Domain E (E regulatory domain):

– 2.412 to 2.472 GHz; 13 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

Software and supported wireless LAN controllers Cisco Unified Wireless Network Software Release 8.2.MR1 or later

Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller

Cisco IOS XE Software Release 16.3 – Target Q3 CY2016

Cisco Catalyst 3850 Series and 3650 Series Switches

802.11n version 2.0 (and related) capabilities 4×4 MIMO with three spatial streams

Maximal ratio combining (MRC)

802.11n and 802.11a/g beamforming

20- and 40-MHz channels

PHY data rates up to 450 Mbps (40 MHz with 5 GHz).

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

802.11 dynamic frequency selection (DFS)

Cyclic shift diversity (CSD) support

802.11ac Wave 1 capabilities 4×4 MIMO with three spatial streams

MRC

802.11ac beamforming

20-, 40-, and 80-MHz channels

PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

802.11 DFS

CSD support

802.11ac Wave 2 capabilities 4×4 MU-MIMO with three spatial streams

MRC

802.11ac beamforming

20-, 40-, 80, 160-MHz channels

PHY data rates up to 5.2 Gbps

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

802.11 DFS

CSD support

Integrated antenna Flexible radio (either 2.4 GHz or 5 GHz)

2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth

5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°

Dedicated 5-GHz radio

5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces ◦   2 Ethernet ports

◦   100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

◦   CAT 5e cabling

◦   Higher-quality 10GBASE-T (CAT 6/6a) cabling

◦   100/1000BASE-T autosensing (RJ-45 – AUX port)

◦   Management console port (RJ-45)

Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H) 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm),
Weight 4.6 lb (2.09 kg)
Input power requirements 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE)

802.3at power injector (AIR-PWRINJ6=)

50W power supply (AIR-PWR-50=)

Power draw 30W at the PSE with all features enabled except for the USB 2.0 port

34W at the PSE with the USB 2.0 port enabled

Environmental Cisco Aironet 3800i

Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

Operating temperature: 32° to 104°F (0° to 40°C)

Operating humidity: 10% to 90% percent (noncondensing)

Operating altitude test: 40˚C, 9843 ft.

System memory 1024 MB DRAM

256 MB Flash

Warranty Limited lifetime hardware warranty

RELATED PRODUCTS